Equipment Needed For Courses
Cavern course
Recreational BCD
One regulator with normal recreational setup of two second stages – one with octopus size length hose and second regular size length, inflator hose and SPG with clip attached
Wet suit 5mm with hood
Booties
Open heel fins
Mask – no snorkel
Safety reel
Three directional and three non-directional line markers
Submersible decompression table
Slate and pencil
Small and sharp knife
Pouch to store accessories, leg mounted recommended
Wrist mounted dive computer or bottom timer – no console
Digital chronometer
One primary light
One backup light
Intro to Cave and Full Cave course
Wing style BCD minimum lift 45 lbs maximum lift 65 lbs no redundant wing recommended
Backplate and harness recommended or soft pack and harness
Two balanced regulators with DIN connectors recommended. One first stage with a short second stage hose and second stage with rubber necklace and SPG with clip attached to it. Second first stage with a 7 foot / 2 meter long second stage hose and second stage with clip attached to it with low pressure inflator hose.
Wet suit 5mm with hood minimum
Booties
Open heel fins
One Safety reel, One primary reel, one jump / gap reel
Three directional and three non-directional line markers
Submersible decompression table
Slate and pencil
Small and sharp knife
Mask and spare mask – no snorkel
Pouch to store accessories, leg mounted recommended
Wrist mounted dive computer or bottom timer – no console
Digital chronometer
One primary light canister type with minimum burn time two hours and 35 watt halogen / 10 watt HID or equivalent light output
Two back up lights with minimum three c-cell batteries and minimum burn time two hours each
Do not hesitate to email us if you have any questions or need assistance.
Technical diving courses
Wing style BCD minimum lift 55 lbs, redundant wing required
Backplate and harness recommended or soft pack and harness
Two balanced regulators with DIN connectors recommended. One first stage with a short second stage hose and second stage with rubber necklace and SPG with clip attached to it, low-pressure inflator hose for redundant wing. Second first stage with a 7 foot / 2 meter long second stage hose and second stage with clip attached to it with low pressure inflator hose.
Wet suit 5mm with hood minimum
Booties
Open heel fins
One lift bag reel
Lift bag 50 lbs lift minimum
Submersible decompression table for gases used during dive
Two slates and pencil
Small and sharp knife
Mask and spare mask – snorkel recommended depending on diving environment dived in
Pouch to store accessories, leg mounted recommended
Wrist mounted dive computer or bottom timer, backup recommended – no console. Multi gas computers recommended, air only computers no suitable for this level of diving
Digital chronometer
One primary light canister type with minimum burn time two hours and 35 watt halogen / 10 watt HID or equivalent light output depending on dive environment
Two back up lights with minimum burn time two hours each depending on dive environment
One, two or three oxygen clean balanced stage regulators with DIN connector fitted with short HP hose and SPG, with 40 inch octopus size length second stage hose and clip attached to the second stage depending on level of training and diving
One, two or three stage bottle rigging including rubber band’s to store low pressure second stage hose, carrying strap and clips for 40 cft and 80 cft alm stage tanks depending on level of training and diving
Rebreather courses
Rebreather unit the course is to be taken with or rent unit
Sufficient Co2 absorbent to change absorbent each and every day for the planned dive or training duration
Sufficient batteries for the electronics to last double the duration of planned dive time
Wing style BCD minimum lift 35 lbs, depending on level of training and diving
Wet suit 5mm with hood minimum
Booties
Open heel fins
One lift bag reel
Lift bag 50 lbs lift minimum
Submersible decompression table for dilluent gases and PO2 used during dives, submersible OUT and CNS tracking table
One slate and pencil
Small and sharp knife
Mask and spare mask
Pouch to store accessories
Wrist mounted dive computer or bottom timer, backup recommended depending on rebreather used – no console. Multi gas computers and computers CCR able recommended, if not existing on the unit electronics.
Digital chronometer
One primary light canister type with minimum burn time two hours and 35 watt halogen / 10 watt HID or equivalent light output depending on dive environment
Two back up lights with minimum burn time two hours each depending on dive environment
One, two or three oxygen clean balanced stage regulators with DIN connector fitted with short HP hose and SPG, with 40 inch octopus size length second stage hose and clip attached to the second stage depending on level of training and diving
·
One, two or three stage bottle rigging including rubber band’s to store low pressure second stage hose, carrying strap and clips for 40 cft and 80 cft alm stage tanks depending on level of training and diving.Do not hesitate to email us if you have any questions or need assistance.